Skip to content
Vardhman Impex
Bone-white fretwork sideboard with a geometric lattice front on a black base

Bone-white fretwork sideboard with a geometric lattice front on a black base

Living · VI-1256

Nagaur Fretwork Sideboard

Fretwork cut by hand, then filled and rubbed back twice so the bone white sits in the grain rather than on top of it.

Reference
VI-1256
Type
Sideboard
Collection
Living
Material
Mango & iron
Finish
Bone white
Dimensions
L150 × D40 × H75 cm
Packed carton
158 × 48 × 83 cm · 0.63 CBM
Per container
44 in 20 ft · 106 in 40 ft HC
Lead time
45–60 days
Minimum
From 12 pieces
Terms
FOB Mundra

FSC 100% / Mix

Available on request

Certified plantation mango available for this design on request.

Enquire on this design

WhatsApp

Sent straight to a person, used only to reply. How we handle it.

Packing figures are indicative. Outer carton allows 4 cm per face. Container counts assume 28 CBM loadable in a 20 ft and 67 CBM in a 40 ft high-cube, single design, no mixed stacking. Small pieces can carry a higher minimum. Exact figures come with the quotation.

All sideboards

In detail

A 150 cm sideboard in solid mango and iron, its front cut in fretwork by hand and finished in bone white. Fretwork is one of the four front techniques the living range is built on, with chevron, parquet and carved relief, all cut and laid on our own benches, and the iron is welded on the same floor. At 75 cm high and 40 cm deep it sits low and shallow enough for a living-room wall or a wide hallway.

Made at Boranada

Framed carcass, timber brought to 8–10% moisture before it reaches a joint, finished against a retained sample rather than a colour code. Nothing in this piece was subcontracted: it is sawn, joined, finished and packed in our own works at Boranada.

The eight stages
Carcass
Framed, not slab-built
Moisture at joint
8–10%
Private label
Available
Custom finish
Sampled before production
Packing
4 cm protection per face
Fumigation
In-house
Compliance
FSC, REACH